Myzone 3 12:00PM 01 Jan 2021
SYSTEM ZONES AC UNIT OPTIONS
System Lock Out
Zone Damper Status
Lock Airflow
Lock Min Airflow
RF Channel
2
Lock Zone Names
99
System Options
Press here to check the status of the
zone dampers
Press here to lock zone names so
that they cannot be changed/
re-named unless the lock
is de-activated
Touch to lock the A/C Unit. You
will need to enter a PIN number
and then the number of days
you want the system to operate
for, until it is locked o. Do not
forget your PIN. WARNING! If pin
code is forgotten, the CPU will
need to be reprogrammed.
Press here to lock MAX/MIN
airflow adjustments
Press here to lock MIN airflow
adjustment only
Press here to change the Radio
Frequency channel the system
operates on. NOTE: if this is
changed all RF signal components
need to be re-paired (Sensors,
Wi-Fi Bridge etc.)
To Next Page
