Enter/Exit Programming Mode 2D Symbologies
188
Gryphon™ GPS4400
PDF417 Set Length 1
Specifies one of the bar code lengths for PDF417 Length Control. Length 1 is
the minimum label length if in Variable Length Mode, or the first fixed length
if in Fixed Le
ngth Mode. Length includes the bar code’s data characters
only. Characters can be set from 0001 to 2,710 characters (pad with zeros)
in increments of 01. Any value greater than 2,710 will be considered to be
2,710.
See page 241 for detailed instructions on setting this feature.
Select PDF417 Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar c
ode again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
0001 = Length 1 is 1 Character
To Next Page
Loading...
Need help?
General