Data Format
48
Gryphon™ GPS4400
Label ID
A Label ID is a customizable code of up to three ASCII characters (convert to
Hex using the ASCII Chart on the inside back cover of this manual), used to
identify a bar code symbology type. It can be appended previous to or fol-
lowing the transmitted bar code data depending upon how this option is
enabled. This feature provides options for configur
ing custom Label IDs or
individually per symbology (see "Individually Set Label ID" on page 49). If
you wish to program the reader to always include an industry standard
label
identifier for ALL symbology types, see the previous feature "Global AIM ID"
on page 45.
See Label ID, starting on page 246 of “References” for more information on setting this
feature.
Label ID: Pre-Loaded Sets
The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-
loaded Sets, starting on page 246 for details on the USA set and EU set.
CAUTION
DEFAULT
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
If your reader came pre-loaded with a custom configuration, the default
ID may differ from that indicated below.
When changing from one Label ID set to another,
all other reader configu-
ration settings, including the host interface type
, will be erased and set to
the standard factory defaults. Any custom configuration or custom
defaults will be lost.
Unlike some programming features and options, thi
s feature requires that
you scan only one programming bar code label. DO NOT scan an ENTER/
EXIT bar code prior to scanning the bar codes below.