DIAGNOSTICS
94
SAFERY LASER SCANNER
SAFETY
• Immediately put the machine out of operation if the behavior of the machine can-
not be clearly identified.
• Immediately put the machine out of operation if you cannot clearly identify or
l
ocate the fault, or if you cannot safely remedy the fault.
• Secure the machine such that it cannot be switched on unintentionally.
• When any work is taking place, use the protective device to secure the machine or
t
o ensure that the machine is not switched on unintentionally.
• Do not carry out any repairs to the device components.
• Do not make any changes to or tamper with the device components.
• Except for the procedures described in this document, the device components
m
ust not be opened.
NOTE
WARNING
Hazard due to lack of effectiveness of the safety device.
Operators to be protected may not be recognized in case of nonobservance.
WARNING
Hazard due to unexpected starting of the machine.
WARNING
Hazard due to lack of effectiveness of the protective device.
Operators to be protected may not be recognized in case of nonobservance.
If you cannot remedy the fault with the help of the information provided in
this chapter, please contact Datalogic Technical Service.
To Next Page
Loading...
Need help?
General