ELECTRICAL CONNECTIONS
42
SAFERY LASER SCANNER
Master M12 12-Pole Connector
The M12 12-pole Master model has various pin typologies. The features of all the elec-
trical pins are showed in the chart below.
Figure 3 - Connector (M12, 12-pole Male)
Multi In (8-pole and 12-pole models)
The Multi In are input signals configurable depending on the safety application needed.
These input signals can have the following functions for 8-pole 12-pole models:
MULTI IN
RESTART
Restarts the device following OSSD
Off-status
RESET
Restores the device after a failure
condition
RESTART 1 /
RESET
Restarts or restores the device
AREA SWITCH 1
Switches the detection areas by
emplo
ying external signals
AREA SWITCH 2
AREA SWITCH 3
AREA SWITCH 4
AREA SWITCH 5
MUTING
ENABLE 1
If it is a high level, the Muting feature is
en
abled, and Muting will be performed
MUTING 11
Automatically deactivates the safety
status on
the whole safety zone
MUTING 12
CATEGORY TYPE COLOR DESCRIPTION PIN OUT
POWER
POWER SUPPLY BROWN 24Vdc 1
POWER SUPPLY GREEN 24Vdc 4
GND_ISO BLUE 0 V 2
GND_ISO YELLOW 0 V 6
INPUT MULTI IN WHITE Selectable by GUI 3
INPUT/OUTPUT
MULTI IN/OUT BLACK Selectable by GUI 7
MULTI IN/OUT RED Selectable by GUI 9
MULTI IN/OUT VIOLET Selectable by GUI 10
MULTI IN/OUT GRAY/PINK Selectable by GUI 11
SAFETY
OUTPUTS
OSSD 1/1 GRAY Safety Output 8
OSSD 1/2 PINK Safety Output 5
OTHER F_EARTH RED/BLUE Functional Earth 12
NOTE
In case of configurations with one or more Slave devices, both POWER
SUPPLY and GND_ISO cables must be connected.
TYPE FUNCTION DESCRIPTION CONNECTION
To Next Page
Loading...
Need help?
General