Datalogic MX-E Series User Manual

Processor Specifications MX-E Series Hardware Guide
Datalogic S.r.l. 4
Processor Specifications
This section lists the general operating specifications for all MX-E Series Processors as well as individual processor
model hardware. Only Datalogic GigE cameras will operate with MX-E Series Processors. USB cameras cannot be used.
Each of the M-Series cameras has different operating specifications. See “M-Series and E-Series Cameras” on page 23 for
details.
Technical Data
Supply voltage (Vs) 24 VDC ±10%
Nominal Current Draw 5.5 A at 24 VDC
Digital Inputs 16 opto-isolated
Input Current On: 2.0 mA or more
Off: 0.16 mA or less
Digital Outputs 16 opto-isolated current sinking (NPN) or sourcing (PNP)
Output Voltage 35 VDC (max)
Output Current 100 mA max per output
Output saturation voltage < 1V
Dimensions 5.12 w x 10.63 h x 10.03 d (in)
130 w x 270 h x 255 d (mm)
Temperature Operating: 0° to +55° C (+32° to +131° F)
Storage: -20° to +60° C (-4° to +140° F)
Relative Humidity (30 °C) Operating: 10% to 90% (non-condensing)
Storage: 5% to 95% (non-condensing)
Vibrations
(EN60068-2-6)
2 to 8 Hz: 1.75 mm amplitude /
9 to 200 Hz: 0.5 g
Shock resistance
(EN60068-2-27)
11 MS (15 G)
Housing material Galvanized plate, plastic
Mechanical protection (EN
60529)
IP20
Weight 4.52 lb. (2.05 kg)
Minimum Impact Software
Version Required
11.5.0
CPU MX-E20: Intel® Celeron 1047UE 1.4 Ghz – dual core
MX-E40: Intel® Celeron G3900E 2.4 Ghz – dual core
MX-E80: Intel® QM170 i5 6440EQ 2.7 Ghz – quad core
System Memory MX-E20: 4 GB DDR3 RAM
MX-E40: 8 GB DDR3 RAM
MX-E80: 16 GB DDR3 RAM

Datalogic MX-E Series Specifications

General

Brand	Datalogic
Model	MX-E Series
Category	Machine Vision Systems
Language	English