MX-E Series Hardware Guide Camera Cable
109 Datalogic S.r.l.
Camera Cable
M1xx and E1xx
The terminal block and cable for connecting M1xx and E1xx cameras are listed in the table below. For cable wire color
codes and connection diagrams, see “M1xx and E1xx Camera Connection” on page 32. The last two digits of the part
number indicate the cable length in meters.
Connector Type Part Number
Terminal Block 661-0399
Camera Cable - DB9 to 6-pin Hirose Male (for use
with above terminal block)
606-0674-xx
Hirose 6-pin Male to pigtail (for use with no termi-
nal block)
606-0672-xx