Compliance
Datalogic S.r.l. makes no representations or warranties for merchantability or fitness for any particular purpose, regarding
Datalogic’s software or hardware. Datalogic S.r.l. shall not be liable for errors contained herein or for incidental or conse-
quential damages in connection with the furnishing, performance, or use of this publication or its contents.
Datalogic S.r.l. reserves the right to revise this publication from time to time and to make changes in the content hereof
without obligation to notify any person of such revision or changes.
Datalogic S.r.l.
Via S. Vitalino 13
40012 Calderara di Reno - Italy
www.datalogic.com
©2015 - 2018 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no
part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form
or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and
the E.U. Impact, P-Series, MX-U Series, MX-E Series, Vision Program Manager (VPM), Pinpoint Pattern Find, and
Control Panel Manager (CPM) are trademarks of Datalogic S.p.A. and/or its affiliates. All other trademarks and brands
are property of their respective owners.
CE Compliance
CE marking states the compliance of the product with essential requirements listed in the applicable European directive.
Since the directives and applicable standards are subject to continuous updates, and since Datalogic promptly adopts these
updates, therefore the EU declaration of conformity is a living document. The EU declaration of conformity is available
for competent authorities and customers through Datalogic commercial reference contacts. Since April 20th, 2016 the
main European directives applicable to Datalogic products require inclusion of an adequate analysis and assessment of the
risk(s). This evaluation was carried out in relation to the applicable points of the standards listed in the Declaration of
Conformity. Datalogic S.r.l. products are mainly designed for integration purposes into more complex systems. For this
reason it is under the responsibility of the system integrator to do a new risk assessment regarding the final installation.
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may
be required to take adequate measures.
EAC Compliance
Customs Union
The CU Conformity certification has been achieved; this allows the Product to bear the Eurasian mark of conformity.
Support Through the Website
Datalogic provides several services as well as technical support through its website. Log on to www.datalogic.com and
click on the SUPPORT link which gives you access to:
• Downloads by selecting your product model from the dropdown list in the Search by Product field for specific Data
Sheets, Manuals, Software & Utilities, and Drawings;
To Next Page
Loading...
Need help?
General
