Datamax E-Class Mark II Programmer's Manual

Appendix F – Bar Code Summary Data
198 Class Series 2 Programmer’s Manual
Bar
Code ID
Symbology Length Checksum
Valid ASCII Characters, decimal value
representation
Linear
Scanner
Supported
J / j
Interleaved 2 of 5 w/ a modulo 10
checksum
Varies M-10 48-57 Numeric only

K / k Plessey Up to 14 M-10
48-57 Numeric only. Option + is last
character for 2
nd
M-11 chksum

L / l
Interleaved 2 of 5 w/ modulo 10
checksum & bearer bars
13 M-10 48-57 Numeric only

M / m 2 digit UPC addendum 2 Yes 48-57 Numeric only [1]
N / n 5 digit UPC addendum 5 Yes 48-57 Numeric only [1]
O / o Code 93 Varies No 35-38, 42-58, 65-90, 97-122

p Postnet Varies Yes 48-57 Numeric only
Q / q UCC/EAN 128 19 Yes 48-57 Numeric only

R / r UCC/EAN 128 K-Mart non-EDI 18 Yes 48-57 Numeric only

S / s UCC/EAN 128 Random Weight 34 + Yes 48-57 Numeric only

T / t Telepen Varies Yes All ASCII characters
U UPS MaxiCode 84 Yes Alphanumeric
u UPS MaxiCode w/ Byte Count Specified Yes Alphanumeric
v FIM 1 No A, B, C, D
z PDF417 Varies Yes All
Z PDF417 w/ Byte Count Specified Yes All
W1c DataMatrix Varies Yes All 8-bit values
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz