Datamax E-Class Mark II Programmer's Manual

Appendix F – Bar Code Summary Data
Class Series 2 Programmer’s Manual 199
Bar
Code ID
Symbology Length Checksum
Valid ASCII Characters, decimal value
representation
Linear
Scanner
Supported
W1C DataMatrix w/ Byte Count Specified Yes All 8-bit values
W1d QR Code – Auto format Varies Yes Alphanumeric
W1D QR Code – Manual format Varies Yes Single-byte or Kanji double-byte
W1f Aztec Varies Yes All 8-bit values
W1F Aztec w/ Byte Count Specified Yes All 8-bit values
W1G / W1g USD-8 (Code 11) Varies Yes 45, 48-57
W1I EAN 128 w/auto subset switching [2]
Varies Yes 32-127

W1J Code 128 w/auto subset switching Varies Yes 32-127

W1k GS1 DataBar (six types) [2] Varies Yes Numeric / Alphanumeric (type dependent)
W1L Planet Code Varies Yes 48-57 Numeric only
W1M / W1m Australia Post 4-State Bar Code Varies Yes Numeric / Alphanumeric (type dependent)
W1N / W1n Industrial 2 of 5 Varies M-10 48-57 Numeric only
W1p Intelligent Mail Barcode (IMB) Varies No 48-57 Numeric only
W1q CODABLOCK Varies Yes
32, 36, 37, 42, 43, 45-57, 65-90 / All ASCII
characters (type dependent)
W1R UCC/EAN Code 128 K-MART NON EDI 18 Yes 48-57 Numeric only
W1S / W1s Standard 2 of 5 Varies M-10 48-57 Numeric only
W1t TCIF Linked 3 of 9 (TLC39) Varies Yes Alphanumeric
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz