Dell EMC PowerEdge T340 DPJ1G User Manual

Next steps
1 Replace the following:
a Trusted Platform Module (TPM)
NOTE: The TPM plug-in module is attached to the system board and cannot be removed. A replacement TPM plug-in
module is provided for all system board replacements, where a TPM plug-in module was installed.
b Memory modules
c Processors and heat sink
d Internal USB key, if installed
e vFlash/IDSDM module
f Expansion cards, if installed
g Internal cooling fan
h Air shroud
2 Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured by using the cable securing
bracket.
3 Follow the procedure that is listed in Safety instructions.
4 Ensure that you:
a Use the Easy Restore feature to restore the Service Tag. For more information, see the Restoring the system using Easy Restore
section.
b If the Service Tag is not backed up in the backup ash device, enter the Service Tag manually. For more information, see the
Manually update the Service Tag section.
c Update the BIOS and iDRAC versions.
d Reenable the Trusted Platform Module (TPM). For more information, see the Upgrading the Trusted Platform Module section.
5 Import your new or existing iDRAC Enterprise license.
For more information, see iDRAC User's Guide, at Dell.com/poweredgemanuals
Restoring the system using Easy Restore
The easy restore feature enables you to restore your service tag, license, UEFI conguration, and the system conguration data after
replacing the system board. All data is backed up in a backup ash device automatically. If BIOS detects a new system board, and the
service tag in the backup ash device, BIOS prompts the user to restore the backup information.
Below is a list of options available:
• Restore the service tag, license, and diagnostics information, press Y
• Navigate to the Lifecycle Controller based restore options, press N.
• Restore data from a previously created Hardware Server Prole, press F10
NOTE
: When the restore process is complete, BIOS prompts to restore the system conguration
data.
• To restore the system conguration data, press Y
• To use the default conguration settings, press N
NOTE
: After the restore process is complete, system reboots.
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System Setup.
About this task
If you know the system service tag, use the System Setup menu to enter the service tag.
108
Installing and removing system components

Dell EMC PowerEdge T340 DPJ1G Specifications

General

Brand	Dell EMC
Model	PowerEdge T340 DPJ1G
Category	Server
Language	English