149Fax
Set the Easy Receive
Related Models:Dell E515dn / Dell E515dw
If Easy Receive is On:
The machine can receive a fax automatically, even if you answer the call. When you see Receiving on the LCD or
hear a click on the phone line through the handset you are using, just replace the handset. Your machine will do the
rest.
If Easy Receive is Off:
If you are at the machine and answer a fax call first by lifting the external handset, press the buttons in the following
table to receive the fax. If you answered at an extension telephone, press *51.
Applicable Models To receive the fax
Dell E515dn/Dell E515dw
Start and then 2
NOTE: If this feature is set to On, but your machine does not connect a fax call when you lift an extension or external
telephone handset, press the fax receive code *51.
NOTE: If you send faxes from a computer on the same telephone line and the machine intercepts them, set Easy
Receive to Off.
1. Press
(Fax).
2. Press Menu.
3. Press p or q to display the Fax option, and then press OK.
4. Press p or q to display the Setup Receive option, and then press OK.
5. Press p or q to display the Easy Receive option, and then press OK.
6. Press p or q to display the On (or Off) option, and then press OK.
7. Press Cancel.
Additional Receiving Operations
• Shrink Page Size of an Oversized Incoming Fax
• Set the 2-sided Printing for Received Faxes
Your machine prints received faxes on both sides of the paper when 2-sided is set to On.
• Set the Fax Receive Stamp
You can set the machine to print the received date and time at the top center of each received fax page.
• Receive a Fax at the End of a Telephone Conversation
If you are speaking on the telephone connected to your Dell machine and the other party is also speaking on a
telephone connected to his fax machine, at the end of the conversation, the other party can send you a fax before
you both hang up.
• Avoid Incoming Fax from Specific Numbers
To Next Page
Loading...
