244 Network
Some email servers do not allow you to send large email documents. (The system administrator will often place a
limit on the maximum email size.) With this feature enabled, the machine will display Out of Memory when
trying to send email documents over 1 MB in size. The document will not be sent and an error report will be
printed. The document you are sending should be separated into smaller documents that will be accepted by the
mail server (based on the ITU-T Test Chart #1 test chart, a 42 page document is approximately 1 MB in size).
Notification
The notification feature allows a "confirmation of receipt" message to be transmitted to the sending station when
the I-Fax has been received. This feature works only on I-Fax machines that support the Message Disposition
Notification (MDN) specification.
Setup Relay
Related Models:Dell E515dn / Dell E515dw
Relay Broadcast
Allows the machine to receive a document over the Internet and then relay it to other fax machines through
conventional analog landlines.
Relay Domain
Register up to ten Domain Names that are allowed to request a Relay Broadcast.
Relay Report
A Relay Broadcast Report is a list of any relayed broadcasts that have been sent through the machine. It can be
printed at the machine that will act as a Relay Station for all Relay Broadcasts. To use this function, you must assign
the relay domain in the "Trusted Domains" section of the Relay function settings.
Scan to E-mail
Select Scan to E-mail to change the resolution and file type for an email attachment. You can scan and send a black
and white or color document from the computer as an attachment.
Scan to FTP
Related Models:Dell E515dn / Dell E515dw
Select Scan to FTP to change the resolution and file type for the attachment. You can scan and send a black and
white or color document directly to an FTP server on your local network or on the Internet.
Fax to Server
Related Models:Dell E515dn / Dell E515dw
You can set Fax to Server to On or Off, and store the prefix/suffix address for the fax server in the machine.
As this section requires you to enter a lot of text characters, you may find that it is more convenient to use Web
Based Management and your favorite web browser to configure these settings.
Network Reset
Select the Network Reset option to reset the print server to its default factory settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
