Dell PowerEdge C6220 II - Page 136

136 | Using the System Setup Program
Token
Setup option
Description
4870
Force PXE Boot
only
Disables PXE to be the boot device only.
4871
Force PXE Boot
only
Enables PXE to be the boot device only. The system
retrying to boot from PXE device.
4873
Active
Processor Cores
This field controls the number of enabled 16 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
4877 PCI-E Slot1 This feature will allow the users to electrically disable
PCI-E Slot1.
4878 PCI-E Slot1 This feature will allow the users to electrically enable PCI-
E Slot1.
4879 PCI-E Slot2 This feature will allow the users to electrically disable
PCI-E PCI-E Slot2.
487A PCI-E Slot2 This feature will allow the users to electrically enable PCI-
E Slot2.
487B PCI-E Slot3 This feature will allow the users to electrically disable
PCI-E Slot3.
487C PCI-E Slot3 This feature will allow the users to electrically enable PCI-
E Slot3.
487F Mezzanine Slot This feature will allow the users to electrically disable
Mezzanine Slot.
4880 Mezzanine Slot This feature will allow the users to electrically enable
Mezzanine Slot.
4881
1st Boot Device
Sets Hard Disk as first boot device.
4882
1st Boot Device
Sets RAID as first boot device.
4883
1st Boot Device
Sets USB Storage as first boot device.
4884
1st Boot Device
Sets CD/DVD ROM as first boot device.
4885
2nd Boot Device
Sets Network as 2nd boot device.
4886
2nd Boot Device
Sets Hard Disk as 2nd boot device.
4887
2nd Boot Device
Sets RAID as 2nd boot device.
4888
2nd Boot Device
Sets USB Storage as 2nd boot device.
4889
2nd Boot Device
Sets CD/DVD ROM as 2nd boot device.
488A
3rd Boot Device
Sets Network as 3rd boot device.