Dell PowerEdge C6220 II - Page 137

Using the System Setup Program | 137
Token
Setup option
Description
488B
3rd Boot Device
Sets Hard Disk as 3rd boot device.
488C
3rd Boot Device
Sets RAID as 3rd boot device.
488D
3rd Boot Device
Sets USB Storage as 3rd boot device.
488E
3rd Boot Device
Sets CD/DVD ROM as 3rd boot device.
488F
4th Boot Device
Sets Network as 4th boot device.
4890
4th Boot Device
Sets Hard Disk as 4th boot device.
4891
4th Boot Device
Sets RAID as 4th boot device.
4892
4th Boot Device
Sets USB Storage as 4th boot device.
4893
4th Boot Device
Sets CD/DVD ROM as 4th boot device.
4894
5th Boot Device
Sets Network as 5th boot device.
4895
5th Boot Device
Sets Hard Disk as 5th boot device.
4896
5th Boot Device
Sets RAID as 5th boot device.
4897
5th Boot Device
Sets USB Storage as 5th boot device.
4898
5th Boot Device
Sets CD/DVD ROM as 5th boot device.
48A0
ACPI SPMI
Table
Disables the ACPI SPMI Ta ble for BMC ROM update.
48A1
ACPI SPMI
Table
Enables the ACPI SPMI Ta ble for IPMI driver installation
.
48A2
BMC LAN Port
Configuration
Sets BMC LAN Port to Dedicated-NIC.
48A3
BMC LAN Port
Configuration
Sets BMC LAN Port to Shared-NIC.
48A4
BMC NIC IP
Source
Sets BMC LAN to get LAN IP from Static mode.
48A5
BMC NIC IP
Source
Sets BMC LAN to get LAN IP from DHCP mode.
48A6 IPv6 Mode Disables IPv6 internet protocol support.
48A7 IPv6 Mode Enables IPv6 internet protocol support.
48A8 IPv6 AutoConfig Disables IPv6 auto configuration.