Dell PowerEdge C6220 II - Page 138

138 | Using the System Setup Program
Token
Setup option
Description
48A9 IPv6 AutoConfig Enables IPv6 auto configuration.
48AA Serial Port Mode Console Redirection baud rate will be set to 3,8400 bits
per second.
48AB
Flow Control
Remote access flow controls by none.
48AC
Flow Control
Remote access flow controls by hardware.
48AD
Flow Control
Remote access flow controls by software.
48AE Terminal Type
The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh, C0h,
and D7h.
48AF
VT-UTF8
Combo Key
Support
Disables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B0
VT-UTF8
Combo Key
Support
Enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B1 Event logging
Disables BIOS to log system events to BMC, errors
include ECC/PCI/PCI-E/HT…etc.
48B2 Event logging
Enables BIOS to log system events to BMC, errors include
ECC/PCI/PCI-E/HT…etc.
48B3 NMI on Error Disables BIOS to generate NMI when PCI-E
uncorrectable errors occur.
48B4 NMI on Error Enables BIOS to generate NMI when PCI-E uncorrectab
le
errors occur.
48B5
Memory
Operating
Voltage
Indicates all DIMMs in the system are operating at 1.25
volts.
48C0 Frequency Ratio Sets frequency multiplier as maximum level.
48C1 Frequency Ratio Downgrades frequency multiplier one level.
48C2 Frequency Ratio Downgrades frequency multiplier two levels.
48C3 Frequency Ratio Downgrades frequency multiplier three levels.
48C8 QPI Frequency Sets the QPI frequency runs at maximum speed.