Dell PowerEdge C6220 II - Page 139

Using the System Setup Program | 139
Token
Setup option
Description
48C9
QPI Frequency
Sets the QPI frequency runs at 4.800G T.
48CA
QPI Frequency
Sets the QPI frequency runs at 5.866G T.
48CB
QPI Frequency
Sets the QPI frequency runs at 6.400G T.
48CC
QPI Frequency Sets the QPI frequency runs at 7.200G T.
48CD
QPI Frequency Sets the QPI frequency runs at 8.000G T.
48D0
Energy Efficient
Policy
Controls the energy efficient policy as performance profile
to configure all necessary settings.
48D1
Energy Efficient
Policy
Default, controls the energy efficient policy as balance
profile to configure all necessary settings.
48D2
Energy Efficient
Policy
Controls the energy efficient policy as low power profile to
configure all necessary settings.
48D3
Direct Cache
Access
Disables the Direct Cache Access.
48D4
Direct Cache
Access
Enables the Direct Cache Access.
48D8
Load
Customized
Defaults
Requests a customized default of SETUP values on the
next boot.
48DA
Save
Customized
Defaults
Saves current settings to customized defaults of SETUP
on next boot.
48DB N/A Requests maximum performance settings of SETUP
values on the next boot.
48DC
N/A Requests a energy efficiency settings of SETUP values on
the next boot.
48DD
N/A
Requests HPCC efficiency settings of SETUP values
on the next boot. Dell will provide the settings before
A-can BIOS.
48DE EFI Shell Requests the EFI Shell as first boot device on the next
boot.