Dell PowerEdge C6220 II - Page 140

140 | Using the System Setup Program
Token
Setup option
Description
48DF Dell ePSA
Diagnostic Tool
Requests auto launchs ePSA diagnostic tool on the next
boot.
48E0 N/A The NIC3 is used for 1st device of PXE boot on the next
boot, followed by NIC1.
48E1 N/A The NIC4 is used for 1st device of PXE boot on the next
boot, followed by NIC1.
48E2 N/A The NIC5 is used for 1st device of PXE boot on the next
boot, followed by NIC1.
48E3 N/A The NIC6 is used for 1st device of PXE boot on the next
boot, followed by NIC1.
48E4 N/A The NIC7 is used for 1st device of PXE boot on the next
boot, followed by NIC1.
48E5 N/A The NIC8 is used for 1st device of PXE boot on the next
boot, followed by NIC1.
48E6 N/A The HDD1 is used for 1st device of PXE boot on the next
boot.
48E7 N/A The HDD2 is used for 1st device of PXE boot on the next
boot.
48E8 N/A The HDD3 is used for 1st device of PXE boot on the next
boot.
48E9 N/A The HDD4 is used for 1st device of PXE boot on the next
boot.
48EA N/A The HDD5 is used for 1st device of PXE boot on the next
boot.
48EB N/A The HDD6 is used for 1st device of PXE boot on the next
boot.
48EC N/A The RAID HDD1 is used for 1st device of PXE boot on
the next boot.
48ED N/A The RAID HDD2 is used for 1st device of PXE boot on
the next boot.
48EE N/A The RAID HDD3 is used for 1st device of PXE boot on
the next boot.