Denso BHT-1505B - Page 103

91
BARCODE Handy Terminal
“4: CODE39”: Detailed settings for Code 39
1. Select “4: CODE39” at the SET BARCODE menu and then press the
ENT key.
The SET CODE39 screen is displayed.
“1: MIN”:
Set minimum number of digits of Code 39
Setting range: 1–99
“2: MAX”:
Set maximum number of digits of Code 39
Setting range: 1–99
- Point - Make sure that the minimum number of digits is less than the
maximum number of digits. If
the value of minimum number of digits is larger than the
maximum number of digits, error
occurs during the reading.
“3: CD CHECK”:
“ON” : Reading is impossible when check digits are incorrect or missing.
“OFF”: Reading is performed regardless of the use of check digits.
2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to select the item to be set.
3. Use the cursor keys ([◄] [►]) to select settings value.
4. Press the ENT key or BS/C key for the settings value to be valid and then return to the SET
BARCODE screen.
“5:CODE93”: Detailed settings for Code 93
1. Select “5: CODE93” at the SET BARCODE menu and then press the
ENT key.
The SET CODE93 screen is displayed.
“1: MIN”:
Set minimum number of digits of Code 93
Setting range: 1–99
“2: MAX”:
Set maximum number of digits of Code 93
Setting range: 1–99
- Point - Make sure that the minimum number of digits is less than the
maximum number of digits. If
the value of minimum number of digits is larger than the
maximum number of digits, error
occurs during the reading.