Digi Connect IT 16

Interfaces Wide Area Networks (WANs)
Digi Connect IT® 16/48 User Guide
92
3. Under Connections, click Modems.
The modem status window is displayed
Command line
1. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modem command:
n To view a status summary for the modem:
> show modem
Modem SIM Status APN Signal Strength
----- ------------- --------- --------- --------------------
wwan 1 (ready) connected 1234 Good (-84 dBm)
>
n To view detailed status and statistics, use the show modem name name command:
> show modem name wwan
wwan: [Telit] LM940
---------------------------------------------------------------------
---------
IMEI : 781154796325698
Manufacturer : Telit
Model : LM940
FW Version : 24.01.541_ATT
Revision : 24.01.541
Status
------
State : connected
APN : 1234
Signal Strength : Good (-85 dBm)
Bars : 2/5
Access Mode : 4G
Temperature : 34C
IP address (IPv4) : 10.200.1.2
Gateway (IPv4) : 10.200.1.1
SIM
---
SIM Slot : 1
SIM Status : ready
IMSI : 21685216482134
ICCID : 26587956542156312312
SIM Provider : AT&T