Digi IX30

Interfaces Local Area Networks (LANs)
IX30 User Guide
163
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Create the bridge and add devices:
a. Click Network > Bridges.
b. For Add Bridge, type a name for the bridge and click .
c. Click to expand Devices.
d. Click Add Device .
e. For Device, select Device: ETH1.
f. Click Add Device  again and select the Device: ETH2.