Digi IX30 User Manual

Virtual Private Networks (VPN) OpenVPN
IX30 User Guide
405
f. For Tunnel, select an OpenVPN tunnel to which users of this group will have access.
g. Repeat to add additional OpenVPN tunnels.
4. Add an OpenVPN authentication user:
a. Click Authentication > Users.
b. For Add, type a name for the user (for example, OpenVPN_User) and click .
c. Type a password for the user.
This password is used for local authentication of the user. You can also configure the user
to use RADIUS or TACACS+ authentication by configuring authentication methods. See
User authentication methods for information.
d. Click to expand the Groups node.
e. Click  to add a group to the user.
f. Select a Group with OpenVPN access enabled.
5. Click Apply to save the configuration and apply the change.

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM