Digi IX30 User Manual

Applications Develop Python applications
IX30 User Guide
629
n
Use the Python serial module—pySerial—to access the serial ports.
n
Eclipse Paho MQTT Python client enables applications to connect to an MQTT broker to
publish messages, and to subscribe to topics and receive published messages.
Note Module-related documentation is in the Digidevice module section.
Digidevice module
The Python digidevice module provides platform-specific extensions that allow you to interact with
the device’s configuration and interfaces. The following submodules are included with the digidevice
module:
This section contains the following topics:

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM