Digi IX30

Applications Develop Python applications
IX30 User Guide
643
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<device id="00000000-00000000-0000FFFF-485740BC"/>
</targets>
<requests>
<device_request target_name="myTarget">
my payload string
</device_request>
</requests>
</data_service>
</sci_request>
7. For the device_request element, replace the value of target_name with showSystem. This
matches the target parameter of the device_request.register function in the showsystem.py
application.
<device_request target_name="showSystem">
8. Click Send.
You should receive a response similar to the following:
<sci_reply version="1.0">
<data_service>
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<requests>
<device_request target_name="showSystem" status="0">Model
: Digi IX30
Serial Number : IX30-000068
Hostname : IX30
MAC : 00:40:D0:13:35:36
Hardware Version : 50001959-01 A
Firmware Version : 22.11.48.10
Bootloader Version : 1
Firmware Build Date : Thurs, 24 November 2022 19:48:00
Schema Version : 461
Timezone : UTC
Current Time : Thurs, 24 November 2022 19:48:00
CPU : 1.1
Uptime : 1 day, 21 hours, 49 minutes, 47
seconds (164987s)
Temperature : 39C
Contact : Jane Smith
Disk
----
Load Average : 0.10, 0.05, 0.00
RAM Usage : 85.176MB/250.484MB(34%)
Disk /etc/config Usage : 0.068MB/13.416MB(1%)
Disk /opt Usage : 47.724MB/5309.752MB(1%)
Disk /overlay Usage : MB/MB(%)
Disk /tmp Usage : 0.004MB/40.96MB(0%)
Disk /var Usage : 0.820MB/32.768MB(3%)</device_
request>
</requests>