Digi IX30

Applications Develop Python applications
IX30 User Guide
644
</device>
<device id="00000000-00000000-0000FFFF-485740BC"/>
<requests>
<device_request target_name="showSystem" status="0">Model
: Digi IX30
Serial Number : IX30-000023
Hostname : IX30
MAC : 00:40:D0:26:79:1C
Hardware Version : 50001959-01 A
Firmware Version : 22.11.48.10
Bootloader Version : 1
Firmware Build Date : Thurs, 24 November 2022 19:48:00
Schema Version : 461
Timezone : UTC
Current Time : Thurs, 24 November 2022 19:48:00
CPU : 1.1
Uptime : 4 day, 13 hours, 43 minutes, 22
seconds (395002s)
Temperature : 37C
Contact : Omar Ahmad
Disk
----
Load Average : 0.10, 0.05, 0.00
RAM Usage : 85.176MB/250.484MB(34%)
Disk /etc/config Usage : 0.068MB/13.416MB(1%)
Disk /opt Usage : 47.724MB/5309.752MB(1%)
Disk /overlay Usage : MB/MB(%)
Disk /tmp Usage : 0.004MB/40.96MB(0%)
Disk /var Usage : 0.820MB/32.768MB(3%)</device_
request>
</requests>
</device>
</data_service>
</sci_request>
Help for using Python to respond to Digi Remote ManagerSCIrequests
Get help for respond to Digi Remote Manager Server Command Interface (SCI) requests by accessing
help for digidevice.device_request:
1. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the IX30 local command line as a user
with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (default, May 9 2021, 22:49:59)
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>