Digi IX30 User Manual

IX30 User Guide
7
Firmware configuration
Review IX30 default settings 39
Local WebUI 39
Digi Remote Manager 39
Default interface configuration 39
Other default configuration settings 40
Change the default password for the admin user 41
Configuration methods 42
Using Digi Remote Manager 43
Using the local web interface 43
Log out of the web interface 44
Use the local RESTAPI to configure the IX30 device 44
Use the GETmethod to return device configuration information 45
Use the POST method to modify device configuration parameters and list arrays 47
Use the DELETE method to remove items from a list array 47
Using the command line 49
Access the command line interface 49
Log in to the command line interface 49
Exit the command line interface 50
Central management
Digi Remote Manager support 52
Certificate-based enhanced security 52
Configure your device for Digi Remote Manager support 52
Collect device health data and set the sample interval 59
Enable event log upload to Digi Remote Manager 62
Log into Digi Remote Manager 64
Use Digi Remote Manager to view and manage your device 65
Add a device to Digi Remote Manager 65
Configure multiple IX30 devices by using Digi Remote Manager configurations 66
View Digi Remote Manager connection status 67
Learn more 68
Interfaces
Wide Area Networks (WANs) 70
Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs) 71
Configure WAN/WWAN priority and default route metrics 71
WAN/WWAN failover 74
Configure SureLink active recovery to detect WAN/WWAN failures 75
Configure the device to reboot when a failure is detected 86
Disable SureLink 94
Example: Use a ping test for WAN failover from Ethernet to cellular 99
Using Ethernet devices in a WAN 102
Using cellular modems in a Wireless WAN (WWAN) 102
Configure a Wide Area Network (WAN) 127
Configure a Wireless Wide Area Network (WWAN) 135
Show WAN and WWAN status and statistics 145
Delete a WAN or WWAN 147
Default outbound WAN/WWAN ports 149
Local Area Networks (LANs) 150
About Local Area Networks (LANs) 151

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM