User authentication Authentication groups
IX30 User Guide
705
4. For Add, type a name for the group and click .
The group configuration window is displayed.
5. Click the following options, as appropriate, to enable or disable access rights for each:
n
Admin access
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access.
where value is either:
l
Full access full: provides users of this group with the ability to manage the IX30
device by using the WebUI or the Admin CLI.
l
Read-only access read-only: provides users of this group with read-only access to
the WebUI and Admin CLI.
The default is Full access full.
n
Serial access
6. (Optional) Configure the serial ports to which users of this group have access:
a. Click Serial ports to expand the Serial ports node.
b. For Add Port, click .
c. In the Port dropdown, select a port.
d. Click again to add additional serial ports.
7. (Optional) Configure OpenVPN access. See for further information.
8. (Optional) Configure captive portal access:
To Next Page
Loading...
