Digital Projection E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
6
Rev D July 2014
12
TEST PATTERN
Open the list of available test patterns.
13
NETWORK
Access network settings.
14
ASPECT
Change the aspect ratio.
15
BLANK
Image mute.
16
LAMP MODE
Open the Lamps menu.
17
INFO
Open the Service menu.
18
LIGHT
Illuminate the buttons on the remote control for 10 seconds.
19
ID SET
Hold for 5 seconds to view ID status.
COMBINATION: ID SET + number
Set the ID (Hold for 5 seconds)
COMBINATION: ID SET + CLEAR
Clear the ID (Hold for 5 seconds)

2 31
5 64
8 97
0
ENTER
FOCUS
TEST
PATTERN
+
EXIT
MENU
ON POWER OFF

ZOOM
+
LENS SHIFT
INPUT PICTURE NETWORK
AUTO SYNC ASPECT BLANK
OVERSCAN FREEZE
INFO.3D MODE
LAMP MODE
LIGHT
CLEAR SHUTTER ID SET
12
14
17
13
15
16
18
19
Infra-red
reception
40°
40°
Notes
To protect the lamps from thermal
shock, it will not be possible to
change the Lamp Mode more than
once within ve minutes.
Use the ID SET feature to assign
discrete ID addresses for up to nine
projectors. This will enable you to
operate each projector separately
with a dedicated remote control.

Digital Projection E-Vision 7500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision 7500 Series
Category	Projector
Language	English