Digital Projection E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series THE OPERATION COMMANDS Remote Communications Guide
61
Rev D July 2014
...continued from previous page
<operation> <command> <values> Notes
PICTURE menu
pic.mode = ? 0 = High Bright
1 = Presentation
2 = Video
contrast = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
bright = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
saturat = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
Only valid when the input is Composite or
S-Video.
tint = ? + - 0 ~ 200 Hue
Not applicable in STANDBY mode or without signal
locked.
Only valid when the input is Composite or
S-Video.
gamma = ? 0 = Film
1 = Graphics
2 = Video
3 = Linear
Not applicable in STANDBY mode or without signal
locked.
color.temp ? 0 = Native
1 = 5400K
2 = 6500K
3 = 9300K
Not applicable in STANDBY mode or without signal
locked.
Not applicable when Color Space is set to
Custom.
Not applicable when edge blending is on.
red.offset = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
green.offset = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
blue.offset = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
red.gain = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
continued on next page...
Notes

Digital Projection E-Vision 7500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision 7500 Series
Category	Projector
Language	English