CONTROL menu continued
3D submenu
• Press ENTER to open the 3D menu, then select from the list:
3D Mode
Choose from DLP-Link and IR, or Off to disable 3D.
3D Sync Invert
Set to On or Off as required.
3D Format
Choose from Frame Sequential, Top/Bottom, Side by Side and
Frame Packing.
INPUT
PICTURE LAMPS
ALIGNMENT
CONTROL
SERVICE
Eco Network Power < Standard >
Auto Power Off < Off >
Auto Power On < Off >
Projector Control < Network >
Network Enter
Startup Logo < On >
Trigger < Auto >
Auto Search < Off >
Dynamic Black < On >
3D Enter
Language Enter
3D
3D Mode < Off >
3D Sync Invert < Off >
3D Format < Frame Sequential >
L R L R
Frame Sequential
L
R
Frame Packing
L
R
Top-and-Bottom
L R
Side-by-Side
Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
To Next Page
Loading...
