ALIGNMENT menu continued
Digital Alignment submenu
• Press ENTER to open the Digital Alignment submenu.
Digital Zoom, Digital Pan, Digital Scan
• Use and to select a digital alignment control.
• Set the slider as required.
Reset
• Press ENTER to reset all Digital Alignment settings to zero.
H/V Alignment submenu
• Press ENTER to open the H/V Alignment submenu.
H Zoom, V Zoom, H Shift, V Shift
• Use and to select an alignment control.
• Set the slider as required.
Reset
• Press ENTER to reset all H/V Alignment settings to zero.
INPUT
PICTURE LAMPS
ALIGNMENT
CONTROL SERVICE
Projection Mode < Front >
Fan Mode < Normal >
Lens Control Enter
Lens Memory Enter
Center Lens Execute
Keystone < 0 >
Digital Alignment Enter
H/V Alignment Enter
Digital Alignment
Reset Execute
Digital Zoom < 0 >
Digital Pan < 0 >
Digital Scan < 0 >
Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
H Shift will only work if the image
has been reduced horizontally using
H Tuning. Likewise, V Shift will
only work once V Tuning has been
applied.
INPUT
PICTURE LAMPS
ALIGNMENT
CONTROL SERVICE
Projection Mode < Front >
Fan Mode < Normal >
Lens Control Enter
Lens Memory Enter
Center Lens Execute
Keystone < 0 >
Digital Alignment Enter
H/V Alignment Enter
H/V Alignment
Reset Execute
H Zoom < 0 >
V Zoom < 0 >
H Shift < 0 >
V Shift < 0 >
To Next Page
Loading...
