Digital Projection E-Vision 7500 Series - Submenus

Digital Projection E-Vision 7500 Series USING THE MENUS Operating Guide
35
Rev D July 2014
Submenus
• Select a submenu using
and .
• then open the submenu by pressing
ENTER.
The submenu appears to the right side
of the menu it was called from.
The name of the submenu is shown at
the top.
• To close the submenu, press MENU.
Sometimes, a submenu leads to a sub-
submenu:
• Select the sub-submenu using
and .
• then open it by pressing ENTER.
The sub submenu appears below the
submenu it was called from.
The name of the sub submenu is shown
at the top.
• To close the sub submenu, press
MENU.
Notes
Some menu options and controls
may not be available due to settings
in other menus. These will be
shaded grey on the actual menu.
MENU 1
MENU 2 MENU 3
MENU 4
MENU 5
MENU 6
Selection < Item >
Submenu 1 Enter
Slider < 100 >
Command Execute
Submenu 2 Enter
MENU 1
MENU 2 MENU 3
MENU 4
MENU 5
MENU 6
Selection < Item >
Submenu 1 Enter
Slider < 100 >
Command Execute
Submenu 2 Enter
Submenu 1
Submenu 1 Item
Submenu 1 Item
Submenu 1 Item
Submenu 1 Item
MENU 1
MENU 2 MENU 3
MENU 4
MENU 5
MENU 6
Selection < Item >
Submenu 1 Enter
Slider < 100 >
Command Execute
Submenu 2 Enter
Submenu 1
Submenu 1 Item
Submenu 1 Item
Sub-submenu Enter
Submenu 1 Item
MENU 1
MENU 2 MENU 3
MENU 4
MENU 5
MENU 6
Selection < Item >
Submenu 1 Enter
Slider < 100 >
Command Execute
Submenu 2 Enter
Submenu 1
Submenu 1 Item
Submenu 1 Item
Sub-submenu Enter
Submenu 1 Item
Sub-submenu
Sub-submenu Item
Sub-submenu Item
Sub-submenu Item
Sub-submenu Item