Digital Projection E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series THE OPERATION COMMANDS Remote Communications Guide
66
Rev D July 2014
...continued from previous page
<operation> <command> <values> Notes
proj.ctrl = ? 0 = RS232 only
1 = RJ45 only
2 = RS232 + RJ45
Not applicable when Eco Network Power is on.
net.ipaddr = ? <string>
net.subnet = ? <string>
net.gateway = ? <string>
net.dhcp = ? 0 = Off
1 = On
startup.logo = ? 0 = Off
1 = On
trig.1 = ? 0 = 5:4
1 = 4:3
2 = 16:10
3 = 16:9
4 = 1.88
5 = 2.35
6 = Letterbox
7 = Native
8 = Unscaled
9 = Auto
If trig.1 is set to Auto, the projector will start
sending the trigger as soon as it is switched on.
Otherwise the trigger will be sent only when the
aspect ratio matches this setting.
Not applicable in STANDBY mode.
auto.src = ? 0 = Off
1 = On
Auto Search
Not applicable in STANDBY mode.
dblack = ? 0 = Off
1 = On
Dynamic Black
Not applicable in STANDBY mode.
lang = ? 0 = English
1 = French
2 = Spanish
3 = German
4 = Portuguese
5 = Chinese Simplied
6 = Chinese Traditional
7 = Japanese
8 = Korean
continued on next page...
Notes

Digital Projection E-Vision 7500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision 7500 Series
Category	Projector
Language	English