Digital Projection Titan Super Quad Series - Switching the Projector off

Digital Projection Titan Quad, & Titan 800 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
Inst 8
Rev F November 2012
Switching the projector off
1. Press on the remote control or the control panel, and hold for 3 seconds, to switch the projector OFF. The power indicator on the
control panel will show amber, the lamp will be off and the projector will be in STANDBY mode.
• Switch off at the switch next to the power connector. Disconnect the power cable from the projector.
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector