Digital Projection Titan Super Quad Series - Editing Fields

Digital Projection Titan Quad & Titan 800 Series USING THE MENUS Operating Guide
Op 4
Rev F November 2012
Editingelds
Some features require a text or numeric eld to be edited.
• To edit a eld, rst select it using and , then press .
• Use and to move the green highlight to the digit or character which is to be changed, then use and to adjust it.
• Use and to select the next digit or character.
• Press to accept the new value, or press to exit without changing.
Notes
Some menu items may not be
available due to settings in other
menus. These will be grayed out on
the actual menu.
The highlighted digit is being edited