HYBRID Coater Service Manual ver1.1 Appendix D
141
CONNECTOR P4 FOR THE CAMERA
This connector is used for connecting the video signal of the camera to the EL-04875
Connection PCB.
See wiring diagrams MHC-0200-0108 for more information.
CONNECTORS P5 AND P6 FOR DISPENSE MOTORS OR ROTARY VALVES
These connectors are present for above mentioned option.
CONNECTOR P7 FOR EL-04870 ILLUMINATION PCB
This Advanced Fiducial Camera Illumination PCB contains LED’s which illuminate the
product.
See wiring diagrams MHC-0200-0108 for more information.
CONNECTOR PAIRS P11 AND P21 FOR VALVE MOUNT ASSEMBLY 1
These connectors are used for the connection of valve mount assembly 1.
See wiring diagram of the valve mount assembly for more information.
CONNECTOR PAIRS P12 AND P22 FOR VALVE MOUNT ASSEMBLY 2
These connectors are used for the connection of valve mount assembly 2.
See wiring diagram of the valve mount assembly for more information.
CONNECTOR PAIRS P13 AND P23 FOR VALVE MOUNT ASSEMBLY 3
These connectors are used for the connection of valve mount assembly 3.
See wiring diagram of the valve mount assembly for more information.
CONNECTOR PAIRS P14 AND P24 FOR VALVE MOUNT ASSEMBLY 4
These connectors are used for the connection of valve mount assembly 4.
See wiring diagram of the valve mount assembly for more information.
CONNECTORS P31, P32, P33 AND P34 FOR VALVE HEATING 1-4
These connectors can be used for the optional valve heating (HC-1390).
To Next Page
Loading...
