dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
102
©
2023 DJI All Rights Reserved.
Waypoint Mapping Oblique
Set Waypionts Live Mission
Recording
Mission Flight Introduction
The mission ight function is illustrated below with Waypoint ights as an example.
Waypoint ights can be planned in of two ways: Set Waypoints and Live Mission Recording.
Use Set Waypoints to create a route by adding editable waypoints on the map. Use Live Mission
Recording to create a route by adding waypoints and editing the target in photos captured
along the route.
Mission Flight - Setting Waypoints
Tap Create a Route, Waypoint ight, and then Set Waypoints to create a new ight route. Tap on
the map to add waypoints, then congure route and waypoint settings.
1. Enable or disable waypoint settings.
2. Reverse Path: tap to swap the start and end points to reverse the ight path. S refers to the
start point.
3. Delete Selected Waypoint: tap to delete the selected waypoint.
4. Point of Interest (POI): tap to enable the POI function and a POI will be displayed on the
1
2
3
4
5
6
7
89
Fly with caution1