dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
18
©
2023 DJI All Rights Reserved.
Calibration
The vision system cameras installed on the aircraft are factory calibrated. If the aircraft
experiences a collision or the working temperature has changed signicantly, it may require
calibration via DJI Assistant 2 (Enterprise Series). Connect the aircraft to a computer and
calibrate the vision system cameras when prompted in DJI Pilot 2.
1. Power on the aircraft.
2. Connect the aircraft and the PC with a USB-C cable.
3. Launch DJI Assistant 2 (Enterprise Series) and log in with a DJI account.
4. Click M350 RTK and the calibration button.
5. Follow the instructions of DJI Assistant 2 (Matrice Series) to enter the remote controller
calibration. Make sure the remote controller touchscreen does not reect any light before
calibration. Face the calibration icon to the vision system and calibrate the six directional
vision systems according to the instructions.
• DO NOT power o or unplug the USB-C cable after calibration. Wait for data calculation.
Using the Vision System
The Vision System enables precision hovering indoors or in environments where GNSS signal
isn't available.
When the GNSS signal is available, the Vision System provides auxiliary information for
improving aircraft positioning accuracy. The Vision System can work well when within 30 m
from the ground and horizontal of 20 m of a wall or other objects to its side, requiring surfaces
of clear patterns and adequate lighting.
30 m
20 m 20 m