dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
©
2023 DJI All Rights Reserved.
83
there is an obstacle above or below the aircraft, the information can be compared with the
height of the obstacle to detect any imminent collision and avoid accidents. When upward
and downward sensing are disabled, OFF will be displayed to remind the user that vertical
obstacle sensing is turned o.
11. Vertical Speed: displays the vertical speed of the aircraft when ascending or descending.
The white line shows the position of the aircraft in three seconds. The higher the vertical
speed, the longer the white line.
12. Altitude (ALT): displays the altitude of the aircraft relative to the takeo point.
13. RTH Altitude (RTH): displays the RTH altitude congured by the ight controller setting.
14. Absolute Altitude (ASL): displays the absolute altitude of the aircraft.
15. Navigation Display: shows the aircraft and gimbal orientation, and obstacle avoidance
information from a top-down perspective. Refer to the Navigation Display section for more
details.
Navigation Display
Navigation Display only shows the speed, altitude and other information on the left and right
sides in gimbal camera view. In FPV camera view, such information is shown in the form of
Primary Flight Display.
1. Aircraft: navigation Display rotates with the aircraft.
2. Aircraft Horizontal Speed Vector: the white line drawn by the aircraft indicates the ight
direction and speed of the aircraft.
3. Aircraft Orientation: displays the current orientation of the aircraft. The displayed degree is
counted clockwise from the north, with the north assumed as 0 degrees and the step length
being 30 degrees. For example, the number 24 in the compass indicates the heading of the
aircraft after a 240-degree clockwise rotation from 0 degrees.
4. Gimbal Orientation: displays the orientation of the gimbal relative to the aircraft in real
time. The icon rotates with the gimbal.
1 2 3 4
5 6
9 10
7
8