dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
©
2023 DJI All Rights Reserved.
19
• If the vision system shuts down or is blocked by other objects, the aircraft will not
be able to hover at a low altitude indoors and the Landing Protection Function that
controls the landing speed will be disabled. Note: the aircraft may be damaged by
landing too fast.
Assisted Braking from Obstacle Sensing
Powered by the vision system, the aircraft is able to actively brake when obstacles are detected
in front. Obstacle sensing works best when lighting is adequate and the obstacle is clearly
textured. The aircraft must y at no more than 38 mph (62 kph) with a maximum pitch angel of
25° to allow for sucient braking distance.
Using Infrared Sensing System
The infrared sensing system can only be used to avoid large, diuse, and reective obstacles
(reectivity >10%).
50°
• The measurement accuracy of the Vision System is easily aected by the light intensity
and the surface texture of the object. The Infrared Sensing System can only be used to
avoid large, diuse, and reective obstacles (reectivity >10%).
• The Vision System may NOT function properly when in any of the following situations:
a. Flying near monochrome surfaces (e.g., pure black, pure white, pure red, pure
green) or without clear texture.
b. Flying near highly reective surfaces.
c. Flying near water or transparent surfaces.
d. Flying near moving surfaces or objects (e.g. above moving people, waving reeds,
shrubs and grass).
e. Flying in an area where the lighting changes frequently or drastically, or in an area
where there is excessive exposure to direct, strong lighting.
f. Flying near extremely dark (< 15 lux) or bright (> 10,000 lux) surfaces.