dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
28
©
2023 DJI All Rights Reserved.
Unlocking GEO Zones
To satisfy the needs of different users, DJI provides two unlocking modes: Self-Unlocking and
Custom Unlocking. Users may request for either on the DJI Fly Safe website or via a mobile device.
Self-Unlocking is intended for unlocking Authorization Zones. To complete Self-Unlocking, the
user is required to submit an unlocking request via the DJI Fly Safe website at https://y-safe.dji.
com. Once the unlocking request is approved, the user may synchronize the unlocking license
through the DJI Pilot 2 app (Live Self-Unlocking) to unlock the zone; alternatively, the user may
launch or y the aircraft directly into the approved Authorization Zone and follow the prompts
in DJI Pilot 2 to unlock the zone (Scheduled Self-Unlocking). For Live Self-Unlocking, the user can
designate an unlocked period during which multiple ights can be operated. Scheduled Self-
Unlocking is only valid for one ight. If the aircraft is restarted, the user will need to unlock the
zone again.
Custom Unlocking is tailored for users with special requirements. It designates user-defined
custom ight areas and provides ight permission documents specic to the needs of dierent
users. This unlocking option is available in all countries and regions and can be requested for
via the DJI Fly Safe website at https://y-safe.dji.com.
Unlocking on Mobile Device: run the DJI Pilot 2 app and tap GEO Zone Map on the home screen.
View the list of the unlocking licenses and tap to view details of the unlocking license. A link
to the unlocking license and a QR code will be displayed. Use your mobile device to scan the QR
code and apply to unlock directly from the mobile device.
For more information about unlocking, please visit https://fly-safe.dji.com or contact
flysafe@dji.com.
20m
20m
20m
20m
Restricted Zone/
Authorized Zone
Ground
Buffer Zone
Altitude Limit
Altitude Zone
Ground