dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
80
©
2023 DJI All Rights Reserved.
Inconsistent firmware versions will affect flight safety, therefore the app will prioritize
consistent rmware updates. Tap the prompt to enter the rmware update page.
• A consistent firmware update is required when the firmware versions of some
modules of the aircraft are inconsistent with the compatible version of the system.
In a typical consistent rmware update situation, the aircraft and remote controller
will be updated to the latest version except for extra batteries. When these
batteries are used, a prompt will appear requiring a consistent rmware update to
ensure ight safety.
10. Camera View
Tap to enter Preight Check view and FPV camera view and switch to gimbal camera view.
Refer to the Preight Check View, FPV Camera View and Gimbal Camera View sections for
more details.
Preight Check View
Tap Enter Camera View on the homepage of DJI Pilot 2 to enter Preight Check view.
1. View the aircraft's health information, flight mode, intelligent flight battery level, remote
controller role, remote controller internal and external battery levels, Home Point status,
RTK status, and camera microSD card storage information.
2. Set the return-to-home altitude, signal lost action, maximum altitude and maximum ight
distance, update the Home Point, select the control stick mode, set the battery warning
threshold and obstacle avoidance.
1
2