dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
66
©
2023 DJI All Rights Reserved.
Intelligent Battery Station
The BS65 Intelligent Battery Station features eight TB65 battery ports, four WB37 battery ports,
one USB-C maintenance port, and one USB-A and one USB-C charging port. It can charge two
TB65 batteries and one WB37 battery simultaneously.
1. Padlock Holes
2. Lock Clip
3. Handle Bar
4. Pressure Valve
5. Retractable Trolley Handle
6. AC Power Port
Warnings
1. Keep liquids away from the inside of the battery station.
2. DO NOT close the cover of the battery station during charging. Make sure it is well-ventilated
and able to dissipate heat.
3. The battery station is only compatible with the TB65 battery and WB37 battery. DO NOT use
the battery station with any other battery models.
4. Place the battery station on a at and stable surface when in use. Make sure the device is
properly insulated to prevent re hazards.
5. DO NOT attempt to touch the metal terminals in the battery station. Clean the metal
terminals with a clean, dry cloth if there is any noticeable buildup after powering o.
6. Take care to avoid injuring your ngers when opening or closing the battery station.
7. Place the batteries in the specied directions.
8. Air pressure in the Battery Station may change during air transportation or after extreme
barometric pressure changes. The pressure valve knob on the side of the Battery Station will
balance the air pressure automatically.
9. Please use the dust blower to clear the sand and dust in the Battery Station.
1
2
5
3
6
7
4
9
8
10
12 13
16
14 15
11 18 17
1
7. TB65 Battery Port
8. WB37 Battery Port
9. USB-C Charging Port
10. USB-A Charging Port
11. TB65 Battery LEDs
12. WB37 Battery LEDs
13. WB37 Battery Level LEDs
14. USB-C Maintenance Port
15. Power Button
16. Battery Station LED
17. Charging Mode Switch
18. Charging Mode LEDs