dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
72
©
2023 DJI All Rights Reserved.
• Refer to the user manual, safety guidelines, and battery labels before use. Users shall
take full responsibility for all operations and usage.
• If only one battery is usable after takeo, land the aircraft promptly and replace the
batteries.
• Expansion ports have a built-in temperature sensor. If the payload power is too large
causing the device to overheat, the aircraft will automatically cut o power supply for
the payload.
• Use batteries provided by DJI. DO NOT use other batteries.
Installing the Batteries
Using Paired Batteries
Label the two batteries with paired battery stickers before use. Charge and discharge the two
batteries together to optimize ight performance and maximize battery life. After the batteries
are inserted and the aircraft is powered on, if there is a huge dierence between their battery
life, the app will display a prompt alerting the user to such condition of the batteries. In this
case, it is recommended to replace them with batteries with similar performance before use.
Powering On/O
Install the batteries in the aircraft before powering on or o.
Power on/o: press the power button, then press again and hold for two seconds. The power
button/indicator glows solid after the aircraft is powered on. The power button/indicator turns
o after the aircraft is powered o.