MATRICE 350 RTK
User Manual
12
©
2023 DJI All Rights Reserved.
Mounting the Gimbal Camera
Press the Gimbal
Detachment
button to remove
the cover.
Align the white and
red dots and insert
the gimbal.
Rotate the gimbal
lock to the locked
position.
• After installation, make sure that the gimbal lock is locked in place.
• Make sure to press down the gimbal detachment button when rotating the gimbal lock
to remove the gimbal camera. The gimbal lock should be fully rotated when removing
the gimbal for the next installation.
Mounting the Intelligent Flight Batteries / Checking the Battery Level
Insert a pair of batteries and lock the battery release toggle.
Check battery level: press the battery level button once.
Power on/o: press and then press and hold the power button to power on/o the aircraft.
1 2 3