dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
38
©
2023 DJI All Rights Reserved.
Replacing the Propeller Blades
Use the H2.5 hex key to replace the propellers. Make sure to use the provided screws and
proper screw glue (recommended model: 243) when replacing the propeller.
• The propeller blades are sharp. Handle with care.
• Using High-Altitude Low-Noise Propellers will reduce the noise but will shorten the life
of the motors to some degree.
• Only use ocial DJI propellers. DO NOT mix propeller types.
• Propellers are consumable components. Purchase additional propellers if necessary.
• Make sure that the propellers are installed securely before each ight.
• Make sure that all propellers are in good condition before each ight. DO NOT use
aged, chipped, or broken propellers.
• To avoid injury, stay away from rotating propellers or motors.
Aircraft Indicators
The aircraft has front LEDs and aircraft status indicators.
Front LEDs Aircraft Status Indicators
When the aircraft is powered on but the motors are not running, the front LEDs glow solid red
to display the orientation of the aircraft.
When the aircraft is powered on but the motors are not running, the aircraft status indicators
display the status of the ight control system. Refer to the table below for more information.