dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
82
©
2023 DJI All Rights Reserved.
Primary Flight Display (PFD)
Primary Flight Display (PFD) makes ying easier and more intuitive, enabling users to see and
avoid obstacles around the aircraft, as well as stop and adjust the ight trajectory if necessary.
Primary Flight Display may appear dierently when the main view is through an FPV camera or
gimbal camera (zoom camera/wide camera/thermal camera).
1. Speed wheel.
2. Wind speed and direction. The wind direction is relative to the aircraft.
3. Aircraft horizontal speed.
4. Preset speed of the ight route during the mission ight.
5. Articial Horizon: reects the attitude of the aircraft, which is opposite to its tilt angle.
6. Aircraft Heading Indicator: always in the middle of the camera view.
7. Flight Path Vector: the position the aircraft is about to reach.
8. Altitude Limit (LIM): congured by the ight controller setting.
9. Preset height of the ight route during the mission ight.
10. Vertical Obstacle Indicator: displays the vertical obstacle information of the aircraft. When
1
2
3
4 5 6 7
8
9
10
11
12
13
14
15
gimbal camera view.
8. AR Projection: projects information such as PinPoints, Waypoints, and the Home Point in
FPV camera view and gimbal camera view to improve flight perception. Refer to the AR
Projection section for more details.
9. Primary Flight Display (PFD): shows parameters such as attitude, speed, altitude, and wind
speed during a ight. Refer to the Primary Flight Display (PFD) section for more details.