dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
©
2023 DJI All Rights Reserved.
111
• During the update process, it is normal for the gimbal to go limp, the aircraft status
indicators to blink, and the aircraft to reboot. Wait patiently for the update to
complete.
• Make sure to keep the aircraft away from people and animals during a firmware
update, system calibration or parameter conguration.
• Make sure you are using the latest rmware version.
• After the rmware update is completed, the remote controller and the aircraft may
become disconnected. Re-link them if necessary.
• DO NOT use other Hardware and Software than specied by the manufacturer.
Firmware Version Information
Refer to the Release Notes for more rmware update information for traceability.
https://enterprise.dji.com/matrice-350-rtk/downloads