dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
©
2023 DJI All Rights Reserved.
55
B. Duration for fully charging a WB37 battery with 0% power:
a. When mounted on the remote controller and the internal battery level is 0%, it takes
approximately 2 hours while fully charging the internal battery.
b. When mounted on the remote controller and the internal battery level is 100%, it takes
approximately 1 hour and 10 minutes.
c. When inserted into the BS65 battery station, it takes approximately 1 hour and 20
minutes.
• The charging time may vary with the ambient temperature.
Charging Mechanism
a. When the remote controller is connected with both a charging device and an external
battery, the remote controller will be powered by the charging device.
b. When the external battery is mounted and the remote controller is not connected with a
charging device, the remote controller will be powered by the external battery. When the
external battery is depleted, the remote controller will be powered by the internal battery.
Checking the Battery Level
Checking the Internal Battery Level
Press the power button once to check the current battery level.
Checking the External Battery Level
Press the power button on the external battery, and the LEDs will indicate the current battery
level of the external battery.
• Alternatively, go to the home screen of the remote controller and check the battery
levels of both the internal and external batteries on the status bar.
Low High
High
Low