dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
52
©
2023 DJI All Rights Reserved.
: Tap to enable or disable Bluetooth. Tap and hold to open settings and connect with
nearby Bluetooth devices.
: Tap to enable DO NOT Disturb mode. In this mode, system prompts will be disabled.
: Display enhancement. Once enabled, the display brightness is enhanced to assist in
shooting. However, there are dierences between the source and display eect, while the
source photo or video taken by the aircraft is not aected.
: Tap to start screen recording.
: Tap to screenshot the screen.
: Mobile data. Tap to turn mobile data on or off; long press to set mobile data and
diagnose network connection status.
: Tap to enable Airplane mode. Wi-Fi, Bluetooth, and mobile data will be disabled.
6. Adjust Brightness
Slide the bar to adjust the brightness. Tap the icon to auto-brightness mode. Tap the
icon or slide the bar to switch to manual brightness mode.
7. Adjust Volume
Slide the bar to adjust the volume and tap to mute. Note that after muting, all sounds of
the remote controller will be completely disabled, including related alarm sounds. Please
turn on the mute with caution.
Video Transmission
M350 RTK aircraft features O3 Enterprise, which enables triple-channel 1080p video
transmission and supports Single Operator or Advanced Dual Operator mode.
1. When in Single Operator mode, the remote controller supports dual-channel 1080p video
transmission.
2. When in Advanced Dual Operator mode, the remote controller supports triple-channel
1080p video transmission and allows seamless swapping between input feeds.